Comunicazioni (Trovare le Unità)

Trovare le Unità

E' possibile scegliee quali periferiche IsoBuster deve poter cercare ed elencare.

IsoBuster - Comunicazioni (Trovare le Unità)

Cercare ed elencare le unità ottiche (CD, DVD, BD, HD DVD)

Con questa opzione selezionata, IsoBuster trova tutte le unità ottiche: CD, DVD, BD, masterizzatori e/o lettori HD-DVD.

Cercare ed elencare altre unità (HD, Flash, USB, Floppy etc.)

Con questa opzione selezionata, IsoBuster trova tutte le altre unità (non ottiche). IsoBuster usa due differenti metodi per cercare le unità ottiche e le altre, ed ecco il perché di questa opzione.
Le unità / supporti trovati in questo modo sono: Hard Disk, USB/Flash media card, Jaz, Zip, Click, Floppy, Diskette, ...

Include logical floppy and diskette drives

Floppy and Diskette drives are not enumerated in the Windows system as "Physical" drives.  They can only be found via drive letter scanning and are hence found as "Logical" drives.

Include logical fixed and removable drives

Aside from the "Physical" drives, IsoBuster can also look for all "Logical" drives, by scanning the drive letters.  This gives access on a higher level and is limited per volume/partition/file-system.  Interfacing on a higher level means that underlying drivers can change or influence the data before IsBuster gets it.  For instance in case of encrypted volumes, the drivers can do decryption before IsoBuster gets the data.

Include RAM drives

Include "Logical" drives that exist only in memory, via Windows or other drivers, and have the properties of a so called RAM drives.

Include Optical (MO, PD, ..) drives

Includes normal optical drives such as CD and DVD drives as well but they will be accessed in a different way than optical drives via the first option.  
Only enable if your optical drives do in fact support magneto optical formats.  For 99% of the drives that won't be the case and even then is it only relevant for special cartridges and not regular CD, DVD, BD discs.
So with this option enabled (and with the very first option enabled as well) you will see your optical drives twice in the list.  The top one accessed via low level SCSI commands, the bottom one accessed like a HDD or USB stick.
For instance, using this method, only the active session will be seen (not all sessions), it won't work for audio or special formats such as CD-i etc.
For normal CDs and DVDs, option one is a far better option but if you are dealing with combi drives that also do magneto optic formats such as MO and PD it makes sense to also enable this option.
The drive enumerated via this method will be able to access magneto optic discs like a hard drive, and it can deal with sector sizes different from 2048 bytes per block.

Automatic drive add or removal detection

When turned on the program detects if a drive is plugged or unplugged, and updates the list of found devices accordingly.  So no need to restart IsoBuster when, for instance, you insert a USB stick into the system.
Before you recover data from a problematic device that tends to 'disappear' in the system due to its hardware problems, it might be wise to turn this option off, because you don't want this 'removal' to be detected.  You want IsoBuster to hold the results no matter if the device was removed according to the system.

Start Idle, without auto-selecting a drive

When you start IsoBuster and this option is set, no device will automatically be selected (and partially explored).  Only when you actively select a device then will its content be read.  

Memorizzare questi settaggi ed usarli sempre

Se si sceglie questo flag, le impostazioni riguardo la ricerca delle unità sono salvate e riutilizzate quando si lancia IsoBuster le prossime volte.
  • Impostazione dei tentativi di lettura
  • Impostazioni di rimappatura
  • Impostazioni di rimappatura personalizzate